The eternal flame at the Arc de Triomphe in Paris.
June 4, 2024 — Paris, France
7 thoughts on “Lunchtime Photo”
Crissa
What fuel makes that color flame?
cld
Vapors from the catacombs.
Josef
lol.
Steve_OH
I suspect PhotoShop.
But calcium does burn with about that color, which makes cld's catacombs explanation more plausible.
Kevin DrumPost author
Yes, I amped it up a bit. But it really is that color, just not quite as saturated.
geordie
It looks to me like that is more a low-oxygen effect as opposed to an attribute of the fuel type. It makes sense to design the vessel to have a reduction atmosphere because the flame will "chase" the oxygen which creates a nice rippling flame effect, in addition to the color being easier to see in daylight.
It is hard to achieve the effect unless you use a solid or liquid fuel which must volatize before burning. If I were trying to achieve that effect, I would probably use kerosene or something similar such as heating oil or diesel.
One of the reasons I recognize that flame type is because it is one of the things you look for towards the end of a wood firing of pottery. The reducing atmosphere caused by too much fuel and too little draft creates carbon monoxide (among other things) which then steals oxygen from the molten glazes. That is what creates all the lovely colors.
dspcole
How do we know that’s not a burner on Kevin’s gas stove photoshopped to look like the eternal flame?
What fuel makes that color flame?
Vapors from the catacombs.
lol.
I suspect PhotoShop.
But calcium does burn with about that color, which makes cld's catacombs explanation more plausible.
Yes, I amped it up a bit. But it really is that color, just not quite as saturated.
It looks to me like that is more a low-oxygen effect as opposed to an attribute of the fuel type. It makes sense to design the vessel to have a reduction atmosphere because the flame will "chase" the oxygen which creates a nice rippling flame effect, in addition to the color being easier to see in daylight.
It is hard to achieve the effect unless you use a solid or liquid fuel which must volatize before burning. If I were trying to achieve that effect, I would probably use kerosene or something similar such as heating oil or diesel.
One of the reasons I recognize that flame type is because it is one of the things you look for towards the end of a wood firing of pottery. The reducing atmosphere caused by too much fuel and too little draft creates carbon monoxide (among other things) which then steals oxygen from the molten glazes. That is what creates all the lovely colors.
How do we know that’s not a burner on Kevin’s gas stove photoshopped to look like the eternal flame?